LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1972 (Keyless Entry System And Remote Functions) >> Diagnostic Information and Procedures >> Keyless Entry System Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the transmitter on the test pad of the J 43241  keyless entry tester and press each transmitter button one at a time, holding each button for three seconds. The tester should sound a tone and illuminate a green light for the entire three second button press.
    • If one or more buttons does not sound the tone and illuminate the green light for the entire three seconds, replace the transmitter battery and retest with the J 43241  keyless entry tester. If the condition continues after battery replacement, replace the transmitter.
  2. Program the transmitter. Refer to Remote Control Door Lock Transmitter Learn . The transmitter should successfully complete the programming procedure.
    • If the transmitter does not program, replace the keyless entry transmitter. If the new keyless entry transmitter does not complete the programming, replace the RCDLR.
  3. Operate the transmitter function while observing the vehicle. The vehicle should perform each of the corresponding functions when selected on the transmitter.
    • If any of the vehicle functions are inoperative, replace the keyless entry transmitter. If the functions remain inoperative after replacement of the transmitter, replace the RCDLR.
scientia non olet · About LEMON Manuals