LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 663 (Computer/Integrating Systems) >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cables.
  2. Remove the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
    Fig 1: Knee Bolster & Bolts
    GM348714Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the brown connector.
    Fig 2: Harness Connectors
    GM387553Courtesy of GENERAL MOTORS CORP.
  4. Disconnect all other connectors (1).
  5. Remove the body control module (BCM) from the sliding bracket.
scientia non olet · About LEMON Manuals