Front Caster and Camber Adjustment

Front Caster and Camber Adjustment

Tools Required

* J 45845 Caster and Camber Adjusting Tool
* J-45845-10 Caster and Camber Adjusting Rod





1. Install the J 45845 or the J-45845-10 to the lower control arm and the frame.
2. Loosen the lower control arm to frame bolt.

Notice: Refer to Fastener Notice.

3. Adjust the camber angle by turning the turnbuckle on J 45845 or the J-45845-10 until the specifications have been met.

Tighten the bolt to 135 N.m (96 lb ft).

4. Verify that the camber is still with specifications. Refer to Wheel Alignment Specifications.
5. Adjust the rear toe. Refer to Rear Toe Adjustment.