Removal & Installation
TRANS ID - 5L40E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Base,AWD | Includes: R&I Transfer Case Assembly. | 9.9 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| Base | | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Base, Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| Base | | 0.2 | | C |
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: |
| Base | | 0.2 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| Base | | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| Base | Includes: Programming. | 0.8 | | C |
TRANS ID - 6L45, 6L50, 6L80E, 6L90E
Includes: Bleed Brake System.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Base,AWD | Includes: R&I Transfer Case Assembly. | 6.9 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| Base | | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Base, Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| Base | | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: |
| | 0.2 | | B |
Combination Procedure: TRANSMISSION ASSEMBLY: Replace:
Includes: Programming. |
| Base | | 0.8 | | C |