Installation Procedure
WARNING: This page is about a different car, the 2006 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors.
- Install the module to the bracket.
- Install the screws that secure the module to the bracket.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the instrument panel compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gages, and Console.
- Reprogram the module. Refer to Control Module References .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.