LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Diagnostic Information and Procedures >> Side Object Sensor Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON, verify the scan tool can communicate with right side object sensor.
    • If the scan tool can not communicate with the right side object sensor, refer to Right Side Object Sensor Malfunction below
  2. Verify the scan tool can communicate with left side object sensor.
    • If the scan tool can not communicate with the left side object sensor, refer to Left Side Object Sensor Malfunction below
  3. Ignition ON, verify that the side blind zone alert system indicators located in the outside rearview mirrors briefly turn ON and then turn OFF during the system self test.
    • If both indicators do not briefly illuminate during the system self test, the side blind zone alert system has been disabled. Refer to Diagnostic Aids under this test procedure.
    • If only one indicator does not briefly illuminate during the self test, refer to Side Object Indicator Malfunction below.
scientia non olet · About LEMON Manuals