Circuit/System Description

Modules connected to the high and low speed GMLAN serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. The modules have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver module as an availability indication of the transmitter module. Each message contains the identification number of the transmitter module.

Wake up signal circuits are energized by the body control module (BCM) to activate the serial data gateway module (SDGM) and other modules, including the BECM, immediately when serial data is required. Additionally after receiving this signal the SDGM energizes another wake up signal to activate the drive motor generator battery control module (BECM) among others.