LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System >> Diagnostic Information and Procedures >> DTC U209A >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector X2 at the SDGM.
  2. Verify less than 0.5 volts between the wake up signal circuit terminal 19 and ground.
    • If greater than the specified range, test the circuit for a short to voltage. If the circuit tests normal, replace the BCM.
  3. Ignition ON, verify B+ between the communication enable signal circuit terminal 16 and ground.
    • If less than the specified value, test the circuit for an open/high resistance. If the circuit tests normal, replace the BCM.
  4. If all circuits test normal, replace the SDGM.
scientia non olet · About LEMON Manuals