Serial Data Gateway Module Replacement (HP2)

Fig 1: View Of Auxiliary Body Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Remove the inflatable restraint module. Refer to Instrument Panel Inflatable Restraint Module Replacement .
1	Serial Data Gateway Module Assembly Procedure Press on the tabs to release the serial data gateway module. Disconnect the electrical connectors. Reprogram the serial data gateway module if replaced. Refer to Control Module References .

Callout

Component Name

Preliminary Procedures:
Remove the inflatable restraint module. Refer to Instrument Panel Inflatable Restraint Module Replacement .

Serial Data Gateway Module Assembly

Procedure

Press on the tabs to release the serial data gateway module.
Disconnect the electrical connectors.
Reprogram the serial data gateway module if replaced. Refer to Control Module References .