Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear fascia. Refer to Rear Bumper Fascia Replacement .

Fig 1: View Of Rear Object Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (1) from the rear object sensor.

Fig 2: View Of Sensor Housing Locking Tabs

Courtesy of GENERAL MOTORS CORP.

Release the locking tabs (1) attaching the sensor to the sensor housing.

Fig 3: View Of Rear Object Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the rear object sensor (1) from the sensor housing.

Fig 4: View Of Rear Object Sensor Retainer Ring

Courtesy of GENERAL MOTORS CORP.

Remove the rear object sensor retainer ring (1) from the sensor.