LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Mirror System >> Diagnostic Information and Procedures >> DTC B1640 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the X3 harness connector at the appropriate door module.
  2. Ignition ON, verify a test lamp does not illuminate between the control circuit terminal 7 and ground.
    • If the test lamp illuminates, test the control circuit for a short to voltage.
  3. Ignition OFF, test for infinite resistance between the control circuit terminal 7 and ground.
    • If less than the specified value, test the control circuit for a short to ground. If the circuit tests normal, test or replace the applicable rearview mirror face.
  4. Test for 5-10 ohms of resistance between the control circuit terminal 7 and the low reference circuit terminal 3.
    • If not within the specified range, test the control circuit and the low reference circuit for an open/high resistance. If the circuits test normal, test or replace the appropriate rearview mirror face.
  5. If all circuits test normal, test or replace the door module.
scientia non olet · About LEMON Manuals