LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Engine Harness Electrical Connector And Battery Current Sensor
    GM1702507Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  3. Disconnect the engine harness electrical connector (1) from the battery current sensor.
    4. Fig 2: Battery Cable Components
    GM1702504Courtesy of GENERAL MOTORS CORP.
  4. Remove the battery current sensor (3) clip from the battery tray, if equipped with a battery current sensor.
    5. Fig 3: Negative Battery Cable Terminal And Stud
    GM1699543Courtesy of GENERAL MOTORS CORP.
  5. Remove the negative battery cable stud (1) from the front of the right cylinder head.
  6. Remove the negative battery cable terminal (2) from the cylinder head.
    7. Fig 4: Negative Battery Cable Terminal, Forward Lamp Wiring Harness Terminal And Ground Bolt
    GM1702546Courtesy of GENERAL MOTORS CORP.
  7. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  8. Remove the forward lamp wiring harness ground bolt (1).
  9. Remove the forward lamp wiring harness terminal (2) from the frame.
  10. Remove the negative battery cable terminal (3) out through the opening between the radiator support and frame.
    11. Fig 5: Battery Cable Clips
    GM1702544Courtesy of GENERAL MOTORS CORP.
  11. Remove the negative battery cable clip (2) from the chassis harness.
  12. Lower the vehicle.
  13. Remove the negative battery cable clip (1) from the right wheelhouse liner.
    14. Fig 6: Negative Battery Cable
    GM1702788Courtesy of GENERAL MOTORS CORP.
  14. Remove the negative battery cable from the vehicle, if equipped without a battery current sensor.
    15. Fig 7: Battery Ground Cable
    GM1702669Courtesy of GENERAL MOTORS CORP.
  15. Remove the negative battery cable from the vehicle, if equipped with a battery current sensor.
  16. If replacing the negative battery cable, remove the battery current sensor, if equipped. Refer to Battery Current Sensor Replacement .
scientia non olet · About LEMON Manuals