LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Positive Battery Cable
    GM1702803Courtesy of GENERAL MOTORS CORP.
  1. Install the positive battery cable to the vehicle.
  2. Install the positive battery cable terminal to the mega fuse stud.
    3. Fig 2: Positive Battery Cable Channel, Clips And Studs
    GM1702801Courtesy of GENERAL MOTORS CORP.
  3. Install the positive battery cable clips to the studs on the plenum front panel.
    4. Fig 3: Generator Battery Jumper Cable
    GM1699546Courtesy of GENERAL MOTORS CORP.
  4. Install the generator battery jumper cable terminal (4) to the mega fuse stud.
    5. CAUTION:

    Refer to Fastener Caution .

  5. Install the generator battery jumper cable to mega fuse nut (3).

    Tighten 

    Tighten the nuts to 9 N.m (80 lb in).

    6. Fig 4: Mega Fuse Cover
    GM1702800Courtesy of GENERAL MOTORS CORP.
  6. Install the mega fuse cover.
    7. Fig 5: Positive Battery Cable Connector And (UBEC)
    GM1702797Courtesy of GENERAL MOTORS CORP.
  7. Install the positive battery cable connector (1) to the UBEC.
    8. Fig 6: Junction Block
    GM1702795Courtesy of GENERAL MOTORS CORP.
  8. Ensure the junction block retainers are in the open position (1).
  9. Position and align the junction block to the 4 bracket pivots (2), once the pivots are engaged, push the retainer down into the locked position (3).
    10. Fig 7: Under Hood Junction Block Cover
    GM1702793Courtesy of GENERAL MOTORS CORP.
  10. Install the under hood junction block cover.
  11. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals