LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> Steering >> Steering Linkage System >> Repair Instructions >> Steering Linkage Shock Absorber Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
    2. Fig 1: Linkage Shock Absorber
    GM1862839Courtesy of GENERAL MOTORS CORP.
    NOTE:

    Discard the steering linkage shock absorber nut.

  2. Remove the steering linkage shock absorber nut (1) from the steering linkage shock absorber (2).
    3. Fig 2: Disconnecting Steering Shock Absorber From Relay Rod
    GM397364Courtesy of GENERAL MOTORS CORP.
  3. Remove the steering linkage shock absorber from the relay rod using puller J 24319-B .
    4. Fig 3: Linkage Shock Absorber
    GM1862840Courtesy of GENERAL MOTORS CORP.
    NOTE:

    Discard the steering linkage shock absorber nut.

  4. Remove the steering linkage shock absorber bolt (2) and nut (3).
  5. Remove the steering linkage shock absorber (1) from the vehicle.
  6. Inspect the following parts:
    • The steering linkage shock absorber for leaks and damage
    • The steering linkage shock absorber bolt for damage or corrosion
scientia non olet · About LEMON Manuals