April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

Fig 1: Inner Tie Rod And Jam Nut

GM1707456

Courtesy of GENERAL MOTORS CORP.

Loosen the jam nut on the inner tie rod (1).
Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications .

CAUTION:

Refer to Fastener Caution .

Install the jam nut (1) on the tie rod and tighten to 75 N.m (55 lb ft).
Check the toe setting after tightening.
Re-adjust the toe setting if necessary.