LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2011 >> STS AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Filler Tube Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel filler cap.
  2. Drain the fuel tank below the level of the fuel filler hose. Refer to Fuel Tank Draining .
    3. Fig 1: View Of Fuel Filler Tube Bolts
    GM785810Courtesy of GENERAL MOTORS COMPANY
  3. Remove the bolts securing the fuel filler tube to the body.
  4. Remove the right rear wheel. Refer to Tire and Wheel Removal and Installation .
  5. Remove the right rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement .
    6. Fig 2: View Of Fuel Filler Tube Brace Bolt
    GM785809Courtesy of GENERAL MOTORS COMPANY
  6. Remove the fuel filler tube brace bolt.
    7. Fig 3: Identifying Fuel Filler Hose To Fuel tank
    GM785808Courtesy of GENERAL MOTORS COMPANY
  7. Disconnect the fuel filler hose (1) from the fuel tank.
  8. Disconnect the filler vent tube (2) from the evaporative emission (EVAP) hose. Refer to Plastic Collar Quick Connect Fitting Service .
  9. Remove the fuel filler tube from the vehicle.
scientia non olet · About LEMON Manuals