Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
- Loosen the jam nut (1) on the outer tie rod.
- Rotate the inner tie rod to the required toe specification setting. Refer to Wheel Alignment Specifications .
- Tighten the jam nut to the outer tie rod.
Tighten
Tighten the nut to 55 N.m (41 lb ft).
- Check the toe setting after tightening. Refer to Wheel Alignment Specifications .
- Re-adjust the toe setting if necessary.
CAUTION:
Care must be taken that the boots are not twisted when rotating the inner tie rods, or damage to the boots may result.
CAUTION:
Refer to Fastener Caution .