LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Battery Cable & Current Sensor
    GM1702510Courtesy of GENERAL MOTORS COMPANY
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement .
  2. Mark the location of the battery current sensor on the battery cable with tape for reference during installation.
  3. Remove the tape securing the battery current sensor to the negative battery cable.
  4. Mark the location of the negative battery cable clips (1) and remove the clips from the cable.
  5. Squeeze the negative battery cable branches together.
    6. IMPORTANT:

    Note the orientation of the battery current sensor prior to removal.

  6. Slide the battery current sensor (2) off of the negative battery cable.
scientia non olet · About LEMON Manuals