LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Under Hood Junction Block Cover
    GM1702793Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the under hood junction block cover.
    3. Fig 2: View Of Junction Block & Retainers
    GM1702795Courtesy of GENERAL MOTORS COMPANY
  3. Lift the junction block retainers from the locked position (3) and rotate the retainers to the open position (1).
  4. Reposition the junction block.
    5. Fig 3: View Of Positive Battery Cable Connector & (UBEC)
    GM1702797Courtesy of GENERAL MOTORS COMPANY
  5. Remove the positive battery cable connector (1) from the underhood bussed electrical center (UBEC).
    6. Fig 4: View Of Mega Fuse Cover
    GM1702800Courtesy of GENERAL MOTORS COMPANY
  6. Remove the mega fuse cover.
    7. Fig 5: View Of Generator Battery Jumper Cable & Components
    GM1699546Courtesy of GENERAL MOTORS COMPANY
  7. Remove the generator battery jumper cable to mega fuse nut (3).
  8. Remove the generator battery jumper cable terminal (4) from the mega fuse stud.
    9. Fig 6: View Of Positive Battery Cable Channel, Clips & Studs
    GM1702801Courtesy of GENERAL MOTORS COMPANY
  9. Remove the positive battery cable channel from the studs on the plenum front panel.
  10. Remove the positive battery cable clips from the studs on the plenum front panel.
    11. Fig 7: View Of Positive Battery Cable
    GM1702803Courtesy of GENERAL MOTORS COMPANY
  11. Remove the positive battery cable terminal from the mega fuse stud.
  12. Remove the positive battery cable from the vehicle.
scientia non olet · About LEMON Manuals