Circuit/System Verification
- Verify that DTC B1325, B1330, B1370, B1380, B1424, B1428, B1440, B1441, B1517, C0800, C0899, C12E1, P0560, or P0562 is not set.
- Ignition OFF, remove the scan tool, open and close the drivers door.
- Wait 60 seconds, ignition ON, verify that DTC C0550 is not set.
- If the DTC is set with symptom byte 39, program the control module that set the DTC. If the DTC resets, replace the control module that set the DTC.
- If the DTC is set with other symptom bytes, replace the control module that set the DTC.