Rear Toe Adjustment
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the adjustment link jam nuts (1).
- In order to adjust the toe, rotate the turnbuckle (2).
- Hold the turnbuckle (2) when tightening the jam nuts (1).
Tighten: Tighten the jam nuts to 75 N.m (55 lb ft).
- Recheck the toe setting after tightening.
- Readjust the toe setting if necessary. Refer to Wheel Alignment Specifications .
IMPORTANT:
Complete the left and right rear toe adjustments separately, per wheel. Using the following procedure.
NOTE:
Refer to Fastener Notice
.