Object Alarm Module Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Object Alarm Module & Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the front passenger bucket seat. Refer to Front Seat Replacement - Bucket (without HP2) or Front Seat Replacement - Bucket (with HP2) .
1	Rear Object Alarm Module Nut (Qty: 3) Tighten: 2 N.m (18 lb in)
2	Rear Object Alarm Module Tip: Position carpet in order to access module. Disconnect electrical connector. Reprogram the rear object alarm module after replacement. Refer to Control Module References .