EBCM Programming and Setup
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
If the electronic brake control module (EBCM) is replaced or needs reprogrammed, the following procedures must be performed:
- EBCM Reprogramming-Refer to Service Programming System (SPS) .
- Perform the module setup EBCM Relearn.
- Perform the module setup Acceleration Sensor Reset.
- Perform the module setup BMC Prim. Piston Pos. Relearn.