Body Control Module Bracket Replacement

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Body Control Module Bracket

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the knee bolster panel. Refer to Knee Bolster Replacement (With SLT) or Knee Bolster Replacement (Without SLT) . Remove the instrument panel driver knee bolster deflector. Refer to Instrument Panel Driver Knee Bolster Deflector Replacement (With RPO SLT) or Instrument Panel Driver Knee Bolster Deflector Replacement (Without RPO SLT) .
1	Front Floor Heater Duct Retainer
2	Body Control Module Bracket Screws (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
3	Body Control Module Bracket Assembly