Rear Object Alarm Control Module Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Object Alarm Module And Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front passenger bucket seat. Refer to Front Seat Replacement - Bucket (without HP2) , Front Seat Replacement - Bucket (with HP2) .
1	Rear Object Alarm Module Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Rear Object Alarm Module Procedure Position carpet in order to access module. Disconnect electrical connector. Reprogram the rear object alarm module after replacement. Refer to Control Module References

Callout

Component Name

Preliminary Procedure
Remove the front passenger bucket seat. Refer to Front Seat Replacement - Bucket (without HP2) , Front Seat Replacement - Bucket (with HP2) .

Rear Object Alarm Module Nut (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
2 N.m (18 lb in)

Rear Object Alarm Module

Procedure

Position carpet in order to access module.
Disconnect electrical connector.
Reprogram the rear object alarm module after replacement. Refer to Control Module References