Trailer Brake Control Switch Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Trailer Brake Control Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the knee bolster. Refer to Knee Bolster Replacement (Except Cadillac) , Knee Bolster Replacement (Cadillac)
1	Trailer Brake Control Switch Procedure Disconnect the electrical connectors. Use a plastic flat bladed tool to release the switch from the knee bolster trim.

Callout

Component Name

Preliminary Procedure
Remove the knee bolster. Refer to Knee Bolster Replacement (Except Cadillac) , Knee Bolster Replacement (Cadillac)

Trailer Brake Control Switch

Procedure

Disconnect the electrical connectors.
Use a plastic flat bladed tool to release the switch from the knee bolster trim.