Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Remove the right side knee bolster trim panel. Refer to KNEE BOLSTER REPLACEMENT - RIGHT .

Fig 1: Removing Right Side Knee Bolster Trim Panel
Courtesy of GENERAL MOTORS CORP.
Disconnect the electrical connectors (2) from the Body Control Module (BCM) (1).

Fig 2: Disconnecting BCM Electrical Connectors
Courtesy of GENERAL MOTORS CORP.
Release the tabs (2) retaining the BCM (1) to the bracket.
Remove the BCM (1) from the vehicle.

Fig 3: Removing BCM
Courtesy of GENERAL MOTORS CORP.