Scan Tool Data Definitions

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

8-Digit GM Part Number: The scan tool displays an 8 digit number which indicates the GM part number of the module.

No. of Fobs Programmed: The scan tool displays 1 Fob - 4 Fobs to indicate the number of keyless entry transmitters that are programmed for the system.

Calibration ID: The scan tool displays a 4 digit number which indicates the calibration ID number of the module.

Invalid Transmitter: The scan tool displays More Than 10 or Less Than 10 which indicates how many times an invalid transmitter has been used in the vicinity of the vehicle.

Key Fob 1 Low Voltage: The scan tool displays counts which indicates the number of times a low battery voltage level was received.

Key Fob 1 Battery Status: The scan tool displays OK to indicate a good battery voltage level was last received.

Key Fob 2 Low Voltage: The scan tool displays counts which indicates the number of times a low battery voltage level was received.

Key Fob 2 Battery Status: The scan tool displays OK to indicate a good battery voltage level was last received.

Key Fob 3 Low Voltage: The scan tool displays counts which indicates the number of times a low battery voltage level was received.

Key Fob 3 Battery Status: The scan tool displays OK to indicate a good battery voltage level was last received.

Key Fob 4 Low Voltage: The scan tool displays counts which indicates the number of times a low battery voltage level was received.

Key Fob 4 Battery Status: The scan tool displays OK to indicate a good battery voltage level was last received.

Key Pressed on Fob: The scan tool displays Dr. Door Unlock, Door Lock, All Door Unlock, Rear Release, or Alarm indicating which keyless entry transmitter button was last pressed.

Last Fob Used: The scan tool displays Fob 1 - Fob 4 which indicates the number of the last keyless entry transmitter used.

Left Side Front Access Panel: The scan tool displays On or Off to indicate the current state of the access panel output driver.

Left Side Rear Access Panel: The scan tool displays On or Off to indicate the current state of the access panel output driver.

Right Side Rear Access Panel: The scan tool displays On or Off to indicate the current state of the access panel output driver.

PROM ID: The scan tool displays a 4 digit number which indicates the ID number of the PROM associated with the module.