LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 763 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Sensing and Diagnostic Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inflatable Restraint Sensing and Diagnostic Module Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Inflatable Restraint Sensing & Diagnostic Module Assembly & Nuts
GM1697508Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Sensing and Diagnostic Module Replacement

Callout Component Name
CAUTION: Do not strike or jolt the inflatable restraint sensing and diagnostic module (SDM). Before applying power to the SDM, make sure that it is securely fastened with the arrow facing toward the front of the vehicle. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.
CAUTION: Refer to SIR Caution .

Preliminary Procedures

  1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
  2. Remove driver front bucket seat. Refer to Front Seat Replacement - Bucket .
2 Inflatable Restraint Sensing and Diagnostic Module Nuts (Qty: 3)
NOTE: Refer to Fastener Notice .

Tighten:  7 N.m (56 lb in)

3 Inflatable Restraint Sensing and Diagnostic Module Assembly
Tip: 
  1. Position carpet in order to access module.
  2. Disconnect the electrical connectors.
  3. When installing, ensure arrow on module is pointed towards front of vehicle.