LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 796 (Keyless Entry System And Remote Functions) >> Diagnostic Information and Procedures >> Scan Tool Data Definitions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Data Definitions

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Battery Voltage Signal

The scan tool displays battery voltage.

Ext. LF Door Handle Switch

The scan tool displays Active/Inactive. The scan tool will display Active when the exterior driver door handle is pressed.

Ext. RF Door Handle Switch

The scan tool displays Active/Inactive. The scan tool will display Active when the exterior passenger door handle is pressed.

Ignition Mode Switch

Then scan tool displays Idle/Crank/Accy/Off. The scan tool displays the current status of the ignition mode switch.

Last Key Fob Used

The scan tool displays Fob 1/Fob2/Fob 3/Fob 4. The scan tool will displays the last key fob used. for any keyless entry function.

No. of Fob's Programmed

The scan tool displays 0/1/2/3/4. The scan tool will displays the number of key fobs currently programmed to the vehicle.