Remote Control Door Lock Receiver Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Remote Control Start Antenna Assembly & Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Disable roof rail SIR system. Refer to SIR Disabling and Enabling . Remove rear opening garnish molding. Refer to Garnish Molding Replacement - Rear Door Upper . Remove back rear corner upper garnish molding. Refer to Garnish Molding Replacement - Rear Corner (Tahoe/Suburban) Remove rear side door sill plate. Refer to Rear Side Door Sill Plate Replacement (Extended Wheelbase) or Rear Side Door Sill Plate Replacement (Standard Wheelbase) . Remove body side lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Avalanche/Escalade EXT) or Body Lock Pillar Garnish Molding Replacement (Suburban/Yukon XL/Escalade ESV) or Body Lock Pillar Garnish Molding Replacement (Tahoe/Yukon/Escalade) . Remove the left rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter - Left (Extended Wheelbase w/E61) or Trim Panel Replacement - Rear Quarter - Left (Extended Wheelbase w/o E61) or Trim Panel Replacement - Rear Quarter - Left (Standard Wheelbase w/E61) or Trim Panel Replacement - Rear Quarter - Left (Standard Wheelbase w/o E61) .
1	Remote Control Start Antenna Assembly Tip: Disconnect the electrical connector.
2	Remote Control Door Lock Receiver Tip: The module slides and snaps into the body structure. Disconnect the electrical connector. If a replacement module is installed, program the module. Refer to Control Module References .

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Disable roof rail SIR system. Refer to SIR Disabling and Enabling .
Remove rear opening garnish molding. Refer to Garnish Molding Replacement - Rear Door Upper .
Remove back rear corner upper garnish molding. Refer to Garnish Molding Replacement - Rear Corner (Tahoe/Suburban)
Remove rear side door sill plate. Refer to Rear Side Door Sill Plate Replacement (Extended Wheelbase) or Rear Side Door Sill Plate Replacement (Standard Wheelbase) .
Remove body side lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Avalanche/Escalade EXT) or Body Lock Pillar Garnish Molding Replacement (Suburban/Yukon XL/Escalade ESV) or Body Lock Pillar Garnish Molding Replacement (Tahoe/Yukon/Escalade) .
Remove the left rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter - Left (Extended Wheelbase w/E61) or Trim Panel Replacement - Rear Quarter - Left (Extended Wheelbase w/o E61) or Trim Panel Replacement - Rear Quarter - Left (Standard Wheelbase w/E61) or Trim Panel Replacement - Rear Quarter - Left (Standard Wheelbase w/o E61) .

Remote Control Start Antenna Assembly
Tip: Disconnect the electrical connector.

Remote Control Door Lock Receiver
Tip:

The module slides and snaps into the body structure.
Disconnect the electrical connector.
If a replacement module is installed, program the module. Refer to Control Module References .