LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 796 (Keyless Entry System And Remote Functions) >> Repair Instructions >> Transmitter Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmitter Programming

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: All transmitters which are to be recognized by the remote control door lock receiver (RCDLR) must be programmed in a single programming sequence. If the system is placed in program mode it will erase all previously programmed transmitters upon the receipt of the programming signal from the first transmitter. Up to 8 transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle.
  1. With a scan tool, access the Remote Control Door Lock Receiver Module Setup menu.
  2. Select Program Key Fobs and follow the on screen instructions.
    3. IMPORTANT: The scan tool must stay connected until all of the transmitters are programmed.
  3. If programming more than one transmitter, repeat step 2.
  4. Remove the scan tool.
  5. Exit the vehicle and operate the transmitter functions in order to verify correct system operation.
scientia non olet · About LEMON Manuals