Memory Seat Control Module Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Memory Seat Control Module Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front driver seat. Refer to Front Seat Replacement - Bucket . |
|
| 1 | Driver Seat Adjuster Outer Finish Cover Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (Manual) or Seat Cushion Outer Trim Panel Replacement - Front Seat (Power) . |
| 2 | Driver Seat Adjuster Inner Finish Cover Refer to Seat Cushion Inner Trim Panel Replacement - Front . |
| 3 | Driver Seat Riser Finish Cover Tip: Pull rearward to disengage the cover from the seat riser. |
| 4 | Driver Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement . |
| 5 | Memory Seat Module Nut (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 6 | Memory Seat Module Tip: Disconnect the electrical connector. |