Remote Control Door Lock Receiver Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the body lock pillar trim panel. Refer to Body Lock Pillar Trim Replacement (Regular Cab) or Body Lock Pillar Trim Replacement (Extended Cab) or Body Lock Pillar Trim Replacement (Crew Cab) . Disconnect the remote control door lock receiver antenna. Refer to Keyless Entry Antenna Replacement (Regular Cab) or Keyless Entry Antenna Replacement (Extended/Crew Cab) .
1	Remote Control Door Lock Receiver Tip: The module slides and snaps into the body structure. Disconnect the electrical connector. If a replacement module is installed, program the module. Refer to Control Module References .

Callout

Component Name

Preliminary Procedures

Remove the body lock pillar trim panel. Refer to Body Lock Pillar Trim Replacement (Regular Cab) or Body Lock Pillar Trim Replacement (Extended Cab) or Body Lock Pillar Trim Replacement (Crew Cab) .
Disconnect the remote control door lock receiver antenna. Refer to Keyless Entry Antenna Replacement (Regular Cab) or Keyless Entry Antenna Replacement (Extended/Crew Cab) .

Remote Control Door Lock Receiver
Tip:

The module slides and snaps into the body structure.
Disconnect the electrical connector.
If a replacement module is installed, program the module. Refer to Control Module References .