Object Alarm Module Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Object Alarm Module & Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front passenger bucket seat. Refer to Front Seat Replacement - Bucket .
1	Rear Object Alarm Module Nut (Qty: 3) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Rear Object Alarm Module Assembly Procedure Position carpet in order to access module. Disconnect electrical connector.

Callout

Component Name

Preliminary Procedure:
Remove the front passenger bucket seat. Refer to Front Seat Replacement - Bucket .

Rear Object Alarm Module Nut (Qty: 3)

NOTE: Refer to Fastener Notice .

Tighten: 9 N.m (80 lb in)

Rear Object Alarm Module Assembly

Procedure

Position carpet in order to access module.
Disconnect electrical connector.