Installation Procedure
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Paint the rear object sensor. Refer to Basecoat/Clearcoat Paint Systems .
- Ensure the paint does not exceed 6 mils. Use a paint thickness gauge suitable for non-ferrous metals. Refer to Paint Gages .
- Insert the sensor into the housing.
- Connect the electrical connector to the rear object sensor.
IMPORTANT:
Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative.