Auxiliary Blower Control Module Replacement

Fig 1: Locating Auxiliary Blower Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Extended Wheelbase) , Rear Quarter Trim Panel Replacement - Right Side (Standard Wheelbase) . Disconnect the blower motor control module electrical connector.
1	Screw, Blower Motor Resistor (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 1.5 N.m (13 lb in)
2	Module, Blower Motor Control

Callout

Component Name

Preliminary Procedure

Screw, Blower Motor Resistor (Qty: 2)

CAUTION:

Tighten
1.5 N.m (13 lb in)

Module, Blower Motor Control