SES Lamp DTC P0340 (PIP5099A)
Publication date: 2013-03-19Reference number: PIP5099A
Supersedes refnos: PIP5099
SES LAMP DTC P0340
TECHNICAL SERVICE BULLETIN
Reference Number(s): PIP5099A, Date of Issue:
March 19, 2013
| Affected Model(s): | 2012-2013 Cadillac Escalade CTS-V 2012-2013 Chevrolet Camaro, Caprice, Corvette 2012-2013 Chevrolet Avalanche, Silverado, Suburban, Tahoe, Express 2012-2013 GMC Sierra, Yukon, Savana with engine RPOs 4.8 5.3 6.0 6.2 L20, L77, L94, L96, L99, L9H, LC8, LC9, LH6, LFA, LFA, LMF, LMG, LSA, LS3, LS7, LS9, LZ1 built during September or October 2012 |
| Supercedes: | This PI was superseded to update model years. Please discard PIP5099. |
SERVICE INFORMATION
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
CONDITION/CONCERN
Vehicle setting an intermittent DTC P0340.
This concern will affect the Sept and Oct 2012 built vehicles.
RECOMMENDATION/INSTRUCTIONS
If this concern is encountered on a vehicle build Sept or Oct of 2012 and SI diagnostics does not lead to a resolution, replace the cam position sensor to correct the DTC P0340 concern.
WARRANTY INFORMATION
For vehicles repaired under warranty use:
| Labor Operation | Description | Labor Time |
|---|---|---|
| J4350 | Camshaft Position Sensor Replacement | Use Published Labor Operation Time |
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.