LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2012 >> SRX AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Secondary Fuel Tank Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: Locating Fuel Tank Module Electrical Connector
    GM2232930Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the electrical connector (1).
  3. Disconnect the evaporative emission line (2). Refer to Plastic Collar Quick Connect Fitting Service .
    4. Fig 2: Fuel Tank Sender Wrench & Cam Lock Ring
    GM2232738Courtesy of GENERAL MOTORS COMPANY
  4. Using the CH 48482  wrench , remove the cam lock ring (1) by turning counterclockwise.
    5. Fig 3: Identifying Secondary Fuel Pump Module & Crossover Tube
    GM2232798Courtesy of GENERAL MOTORS COMPANY
  5. Partially raise the secondary fuel pump module and disconnect the crossover tube (1) by pulling back the plastic retaining tab (2).
    6. Fig 4: View Of Evaporative Emission Line
    GM2232933Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .
    7. Fig 5: Identifying Secondary Fuel Tank Module & O-Ring
    GM2232942Courtesy of GENERAL MOTORS COMPANY
  7. Remove the secondary fuel tank module (1) and the O-ring (2).
scientia non olet · About LEMON Manuals