BARTEC TPMS Reset Procedure
- Inflate tires to correct pressure.
- Apply parking brake.
- Turn ignition ON.
- Press the MENU button on the DIC (located on turn signal lever in Cruze & Camaro and on instrument cluster for all others) until the vehicle's tire pressures are displayed.
- Press SET/CLR (this button is located at the end of the turn signal lever on Cruze & Camaro). Vehicle asks 'Are you sure that you want to relearn?' Select YES.
- Starting at LF tire, activate sensor.
- Repeat procedure for remaining tires in the following order: RF, RR, and LR. After completing LR tire, horn sounds twice.