Circuit/System Verification
- Ignition ON. Radio ON.
- Verify DTC U0100-U02FF is set.
- If the DTC is set
Refer to DTC U0100-U02FF .
- If the DTC is not set
- If the DTC is set
- Verify DTC U2098 or DTC U0029 02 is set.
- If any of the DTCs are set
Refer to DTC U2098 .
- If none of the DTCs are set
- If any of the DTCs are set
- Verify DTC U0028 is set.
- If the DTC is set
- Access the A11 Radio's Last Working MOST ID of Node 1-9 parameters with a scan tool to view MOST device location IDs and MOST bus configuration.
- Access the A11 Radio's Surrogate MOST Master Node Upstream Position parameter with a scan tool to determine the surrogate MOST Master device and where the MOST ring break occurs. For more information, refer to Diagnostic Aids section.
- Refer to Circuit/System Testing .
- If the DTC is not set
- All OK.