Checking and Adding Power Steering Fluid
- Run the engine until the power steering fluid reaches about 80°C (170°F).
- Turn the engine OFF.
- If equipped with the LF1 engine, remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
- Clean the power steering fluid reservoir and the reservoir cap.
- Remove the reservoir cap.
- Inspect the power steering fluid level on the cap stick. Ensure that the fluid level is at the MAX mark on the cap stick.
- Add the proper fluid to the reservoir, if necessary. Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Install the reservoir cap.
- If equipped with the LF1 engine, install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
NOTE:
Inspect the power steering pump fluid level at regular intervals.
CAUTION:
When adding fluid or making a complete fluid change, always use the proper power steering fluid. Failure to use the proper fluid will cause hose and seal damage and fluid leaks.
NOTE:
If the power steering fluid color is red or pink, use GM DEXRON®-VI Automatic Transmission Fluid. If the power steering fluid color is amber or brown, use GM Power Steering Fluid.