Power Steering Fluid Cooler Replacement

Preliminary Procedures

1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
2. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
3. Place drain pans under the vehicle.

Procedure

1. Release the power steering fluid cooler from the plastic clip and disconnect the power steering hoses from the cooler.
2. Connect the power steering hoses to the power steering fluid cooler and secure the cooler in the plastic clip.
3. Clean any excess power steering fluid from the vehicle and remove the drain pans.
4. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .