Forward Range Radar Module Replacement

Fig 1: Forward Range Radar Module & Mounting Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front bumper energy absorber. Refer to Front Bumper Energy Absorber Replacement .
1	Forward Range Radar Module Fastener (Qty: 2) CAUTION: Refer to Fastener Caution .
2	Forward Range Radar Module Fastener Tighten 9 N.m (80 lb in)
3	Forward Range Radar Module Bracket
4	Forward Range Radar Module Bracket Fastener (Qty: 3)
5	Forward Range Radar Module Procedure Disconnect the electrical connector. For programming and set up, refer to Control Module References . Use a digital angle gauge to align the forward range radar module vertically (at the edge or on the bracket behind the module). NOTE: The digital angle gauge must have an accuracy of ±0.5 degrees (9 mm/m). The vertical position of forward range radar module is 90 degrees (±3 degrees).