LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2015 >> XTS Base >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Steering Column Lock Control Module Programming and Setup >> Replace and Program Steering Column Lock Control Module or Reprogram Steering Column Lock Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replace and Program Steering Column Lock Control Module or Reprogram Steering Column Lock Control Module

NOTE:

To ensure that the steering column lock password from the BCM is learned: turn ignition ON and then OFF, close all doors, and wait 5 minutes.

To program a replacement steering column lock control module or reprogram an existing steering column lock control module, perform the following procedure:

  1. Install EL-49642  SPS programming support tool.
  2. Ignition ON.
  3. Access the Service Programming System (SPS) and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select Steering Column Lock Control Module - Programming and follow the on-screen instructions.
  5. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
scientia non olet · About LEMON Manuals