Rear Toe Adjustment
- Measure the alignment on an alignment rack. Refer to Wheel Alignment Measurement .
- If adjustment is necessary, loosen rear cam bolt and nut.
- Rotate the cam bolt in order to adjust the toe angle. Refer to Wheel Alignment Specifications .
- Hand tighten the cam nut, but do not tighten the nut to the specification yet.
- Re-inspect the rear toe angle and adjust as necessary.
- Hold the cam bolt and tighten the cam nut.
Tighten
150 N.m (111 lb ft)
- Repeat the procedure for the other rear wheel.
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution .