Steering Column Lock Control Module Replacement

Preliminary Procedures

1. Ensure the steering wheel and the front wheels are in the straight ahead position.
2. Instrument Panel Knee Bolster Replacement
3. Floor Front Air Outlet Duct Replacement - Left Side
4. With foot OFF the brake pedal and the shift lever in the PARK position, press the ignition and start switch once. This will place the ignition system in the ACCESSORY mode and unlock the steering column for 5 minutes.
5. Turn the steering wheel to verify the steering column is NOT locked.
6. Disconnect the steering column lock control module electrical connectors.
7. With foot OFF the brake pedal and the shift lever in the PARK position, press the ignition and start switch once. This will place the ignition system in the OFF mode and leave the steering column unlocked as long as the electrical connectors are disconnected.

Procedure

1. Remove the OLD steering column lock control module bolts.

   DISCARD the bolts.

2. Install the NEW steering column lock control module bolts.

   Tighten the bolts until the bolt heads break off.