Chassis Control Module Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Chassis Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Fuel Pump Flow Control Module Fastener CAUTION: Refer to Fastener Caution . Tighten 7 N.m (62 lb in)
2	Fuel Pump Flow Control Module Procedure Disconnect the electrical connector. If replacing, reprogram the module. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the rear compartment left side fuse access panel.

Fuel Pump Flow Control Module Fastener

CAUTION: Refer to Fastener Caution .

Tighten
7 N.m (62 lb in)

Fuel Pump Flow Control Module

Procedure