| Includes: Perform Relearn procedure.
DOES NOT include wheel alignment.
Includes: Disable and Enable High Voltage System. | 9.8 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: OUTPUT SHAFT SEAL: Remove & Replace: |
| Each | | 0.2 | | B |
| Combination Procedure: TORQUE DAMPENER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| Includes: Programming. | 0.8 | | C |
| Combination Procedure: TRANSAXLE OIL COOLER & LINES: Flush: |
| | 0.3 | | C |