Installation Procedure
- Install Wireless Charging System Module (2)
- Install Wireless Charging System Module Bolt (1) (Qty: 4) and tighten to 1 N.m (9 lb in)
- Install Wireless Charging System Module Bracket (2)
- Connect the electrical connector.
- Install Wireless Charging System Module Bracket Bolt (1) (Qty: 2) and tighten to 1 N.m (9 lb in)
- Install Instrument Panel Center Compartment Liner (1)
- Close the climate control system panel.
CAUTION:
Refer to Fastener Caution .